|
Seat Height 
 |
|
Kinemat Tilt Tension
|
 |
Paddle-shaped lever on right side
Chair height should be adjusted so that your feet rest flat on the floor.
To raise: While taking your weight off chair, lift lever up.
To lower: While seated, lift lever up.
Top of page
|
|
 |
Long stem on right side with knob
Increased tilt tension provides more stability and back support while you recline.
To increase tension: While seated, turn knob forward (clockwise, toward + sign).
To decrease tension: While seated, turn knob backward (counterclockwise, toward - sign).
Top of page |
|
Arm Height Wheel
|
|
Arm Height
Lever
|
 |
Wheel on base of arm support
Arm support helps take weight off your shoulders.
To raise or lower right arm: While seated, turn right wheel upward until arm loosens. Grasp base of arm
support and raise or lower to desired height. Turn wheel downward to lock.
To raise or lower left arm: While seated, turn left wheel downward until arm loosens. Grasp base of arm
support and raise or lower to desired height. Turn wheel upward to lock.
Top of page |
|
 |
Lever on base of arm support
To raise
or lower arm: While seated, lift lever
to unlock. Grasp base of arm support and raise
or lower to desired height. Lower lever to lock.
Top
of page
|
Arm
Angle
|
|
PostureFit
|
 |
Front
of each armpad
Wing arms inward
for support while using keyboard. Swing arm out to support use of computer
mouse.
To swing arms in or out: While seated, grasp front
end of armpad and pivot it to the left or right.
Top
of page |
|
 |
Knob
on right side of chair
To
engage: While seated, turn knob forward (clockwise)
until it stops. Then turn knob backward (counterclockwise) until
you find the support that feels right for you.
To
disengage: While seated, turn knob backward (counterclockwise).
Note: Set
PostureFit with tilt limiter engaged in forward position to achieve
the best fit for you. Before making this adjustment you should be seated with your back in the pocket of the chair back. Then
adjust PostureFit so that it comfortably supports the natural
alignment of your spine and provides lower back comfort.
Top
of page |
|
Forward Tilt
|
|
Tilt Limiter
|
 |
Front lever on left side
Normally used with increased chair height, this relaxes the bend of your waist, knees, and ankles.
To position chair forward: Lean back and lift lever all the way up. Lean forward.
To resume horizontal position: While seated, push lever all the way down. Lean back.
Top of page | |
 |
Rear lever on left side
If you want to sit in an upright position, set the tilt limiter when the seat is in a horizontal or forward position.
To limit tilt range: Recline as far as you like. Move lever up to define the limit of recline. You can still move
forward. Readjust as necessary.
To release tilt limiter: Lean forward, press lever down.
Top of page
|
|
Lumbar Height
|
|
Lumbar Depth
|
 |
Thick pad on back of chair
Adjust lumbar height to support your spine.
To change height: Using equal pressure on each end of lumbar support pad, raise or lower
it to desire position within adjustment track.
Top of page |
|
 |
Thick pad on back of chair
Switch between thick and thin sides so that it comfortably supports the natural curve of your spine.
To adjust depth: Using equal pressure on each end of lumbar support pad, lift it out of its track.
(Notice that one side of support pad is thicker than the other side.)
Top of page |
